Kalimba Holder, Wall Mount
Description
Kalimbas are cool finger pianos. I wanted to mount mine next to some guitars, so I made a mount that connects to the infamous Guitar Wall Mounts. https://www.thingiverse.com/thing:481198 The Kalimba tilts backwards by 22.5 degrees. I printed with the back against the build plate with tree supports in Cura. The 4 spikes are 10 mm wide, and 10 mm thick at the base, and the support under the instrument is about 18 mm deep. This was designed for an instrument 135 mm wide and 32.6 mm deep on its base. If yours is bigger or smaller by a signficant amount, scale it in the slicer before printing accordingly.
Statistics
Likes
0
Downloads
0