Ring Video Doorbell (Wired) NuTone Intercom Adapter
Description
Ring Video Doorbell (Wired) Model Number 5AT3T5 Adapter Plate To Go Over NuTone123mm wide x 165mm tall intercom (NuTone Model Number Unknown). Doorbell shield covers mounting holes for ring, bottom security screw just accessible still. Legacy mounting screws still reachable, but recessed and required long, skinny driver. I initially printed in Prusament PETG Ultramarine Blue, but had more luck in Prusament Opal Green PLA with 225C First Layer and 215C other layers (temp matters for surface finish) 20% Infill, Gyroid. Print orientation as shown in pics. Recommend at least 5mm solid bottom layers as this is a mounting plate. Otherwise the curved geometry and infill should make the other surfaces plenty strong. No Supports Required.
Statistics
Likes
0
Downloads
0