Sunlu S1 Dryer 5010 blower mount
Description
This remix was specifically made to use a 5010 blower (24 volts) instead of a 4010. Since the body of the blower is bigger I redesigned the base and put the holes for the screws inside the body, so they are hidden. I extended the screw holes to the top through the back of the mount. The pass-through holes are 7mm wide, for big screwdrivers. I also added a hook in the left wall to place the thermistor. The fan easily enters the support and is fixed on it with the lower tabs. The glabifron's design has a grade of 50 degrees, but since this designs has a larger blower, the grade was set to 67 degrees and a length of the base to 26mm. The spool is 2mm away of touching this holder. Remixed from: https://www.thingiverse.com/thing:4946616 The blower cables can be feeded through the body of the mount once the screws are tightened. You can use PLA or PETG to print this part and not as the glabifron's design which used TPE. During my test, the blower keeps the air warmer recirculating in the dryer under a controlled humidity of 27% or less. I live in a tropical zone and the humidity can rase upto 100% during raining season and non less than 40% during summer, so having this blower running is a great idea.
Statistics
Likes
0
Downloads
0