Balsa Stripper
Description
A must have tool for every balsa model builder. This tool helps you cut balsa strips with precise width everytime with square cuts everytime. Specifically designed for #11 surgical scalpel blade. Ergonimical design for ease of use while cutting. <b>Hardware required:</b> M3x10 bolt - 2 nos M3 nuts - 2 nos M3 washers - 2 nos M4x20 bolt - 1 no M4 nut - 1 no M4 washer - 1 no 11 scalpel surgical blade - 1 no <b>Recommended slicer settigs :</b> Nozzle: 0.4 Material: PLA/PETG/ABS Layer Height/Resolution : 0.2 mm Infill: 40% Infill pattern: Grid Note: This tool is originally designed for a right handed person. You can mirror the models in your slicer if you prefer it left handed.
Statistics
Likes
4
Downloads
0