AK 1913 Picatinny rail receiver plug
Description
AK Picatinny rail trunnion blocks cost $100+. This printed receiver plug will work with any $30 milsurp AK fixed rear trunnions. You will need to cut off the extension on the trunnion. This IS a recoil absorbing component! Print using Fiberglass Nylon using a 0.6mm nozzle at 295C, 120C, 0.8mm extrusion width, 0.2mm layer height at 30mm/s with brim enabled. I am not responsible for any damage or injuries whatsoever.
Statistics
Likes
0
Downloads
0