Alleyway Nest Cam (Battery) Mount
Description
Nest Cam (Battery) mount for narrow spaces, such as alleyways, where the default mount does not allow enough of a view along the mounting surface. Allows camera direction to be parallel to the mounting surface with 45 degree angles. The mounting angle is 45 degrees and the distance from the mounting surface is about 8cm (10cm perpendicular from the mounting plate). The screw holes are designed for the mounting screws that come with the camera. Print with the camera mount plate on the build plate with supports enabled - the rough bridged surface will be hidden by the camera. ASA is recommended for UV (sun) and heat resistance. Ideally print ASA in an enclosure to prevent warping and increase layer adhesion.
Statistics
Likes
0
Downloads
0