Coffee Grinder Insert for Melitta Molino
Description
This is for a Molitta Molino grinder and the portafilter holder that comes with the Gaggia Classic espresso machine. It allows for you to grind the coffee directly into the portafilter, rather than the standard container that comes with the Melitta Molino. Overall, this is so much more convenient, than grinding the coffee into the original storage container, then transferring it to the portafilter. I hope you find this as useful as I did. Notes: 1.)If you use a bottomless portafilter, raise the floor underneath it for support. The portafilter this was designed for, had the bottom section which sits on the bottom of the holder. 2.) The original coffee container that comes with the melt moline has a very slight slope, on the top. I replicated this in the design, but it is so slight that when you print it there are visible "steps". I'm not convinced there is any real use for the slope, and will probably remove it when I re-print this eventually (the current print works, so I'm not wasting filament just for that). If you do make this edit, let me know what you think. 3.) The supports were difficult to remove. I printed with the flattest sides on the bed, but there is very little distance from the bed to the model, and only the outside edges make contact. Assume there will be some scraping of those supports off unless you dont generally have this issue.
Statistics
Likes
0
Downloads
0