PrusaMINI+ RPi-Webcam Utility Plate
Description
A plate to attach to the back of a PrusaMINI+ to give it attachments for a RaspberryPi and a WebCamera. Used to physically attach accessories for OctoPrint and webcam monitoring functionality. Screenshots also include parts from the [Modular Mounting System](https://www.thingiverse.com/thing:2194278) and [Webcam Screw to GoPro Mount](https://www.thingiverse.com/thing:5556547). Screws required: * M3x10mm Socket Head (x4) * M2x10mm (x4) * M5x25mm (x4) The M5 screws will replace the current ones on the PrusaMINI+ The back plate model has extra holes that don't match up to anything because the design used to be for the front, where additional screws are, and those holes were left in because of laziness. Assembly notes - The plate does not replace the one on the PrusaMINI+, it gets placed over it (hence the need for longer M5 screws) - Print one of each model. - The M3 screws should be used to connect the RPi arms to the back plate first - M2 screws are used for connecting the RPi to the arms. - Attaching the RPi or attaching to the PrusaMINI can happen in either order. The M5 screws will probably be a little awkward to screw in because the RPi and/or the arms will be in the way. This is normal, be careful. The plate will barely fit/not-fit on the PrusaMINI+ build plate. It seems like it will fit, but the brim goes slightly out of bounds. I've been rotating it 45 degrees to print it at a diagonal.
Statistics
Likes
0
Downloads
0