Slim Gotek cases with and without OLED screen placeholder
Description
These are 3D models of slim Gotek cases for the use with the circuit board of the normal size Gotek floppy emulator. One case is for Gotek without OLED screen, the other case is adjusted to install the 128x32 OLED screen. There are also "noholes" version for all parts where holes are covered with thin polygons (in case your printer can't print the part with holes at the first layer). The activity LED on the Gotek Board will require adjustment in order to fit into the case. Some bending + pin isolation may be required. WARNING! This is currently WIP (work in progress), these cases have not been tried yet with the real Gotek' circuit board. Feel free to send your feedback if you print and try to install these boards and screens. If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page: https://www.thingiverse.com/Wierzbowsky/designs
Statistics
Likes
1
Downloads
0