Printer Camera Mount (Chonky)
Description
The embarrassing part first: wow is my workspace a mess in these pictures! Now you know the REAL me. ;-) I’ve seen a lot of different versions of this gadget, and I have made here a variant with some mods which I find useful. I’m hoping others also find them useful. - The mounting design is made to suit my Reality Ender 3v2 frame. I have also included a T-nut model for the sake of aiding you with mounting after printing. - The base of the arm has a rotating locking connector. This means you can turn the arm holding the camera rather than have a fixed perspective. (Special thanks to JaunAto’s original design https://www.thingiverse.com/thing:5415138 which is remixed here) - The base also has guides in the base plate to help stay aligned in the grooves on the printer frame. - This turning connector is modeled to print flat, adding strength to the connector, see the next bullet point. - I have also added connector parts. These parts are similar to standard GoPro connector parts, but they are definitely not compatible. I hate GoPro parts because they are too fragile. I am also aware that printing these parts has the hazard that if you print them “tall-ways” the direction of the layers causes fragility. These connector parts are all modeled to print “flat-wise” so that layers can run “tip-to-root” rather than “side-to-side”. The lengths of the length-wise lines add strength. When you print these, print at high resolution to get the curved ends as smooth as possible. - Because all the connectors are my design, I have added my design for the “open” GoPro Camera clamp. It should be suitable for all GoPro and GoPro imitators, either forward- or back-facing. You will need to add supports when you print this. - Printing is at your discretion. I print the connectors at 30% infill but with thick walls (8 layers) for strength. This makes the connector ends 100% fill and body lighter (less waster material). - The nut cavities are formatted to accept 10-32 nuts which you can find at Lowes or HomeDepot. Enjoy!
Statistics
Likes
1
Downloads
0