5-1/4" drive bay SSD Bracket
Description
My old PC chassis has a lot of empty space now that the optical drives are all torn out. I modeled this to fit in their place. It's not a very "refined" design, but it gets the job done. Holds 3 x 2.5" SSD drives in place of a 5.25" optical drive. Recommend using a couple of M3 screws to secure it to the chassis. There are no screw holes to hold in the drives, instead, the width of the slots for the drives is slightly reduced deeper in, so there is a slight compression fit that holds them in place, but not so much you can't get them out easily enough. Printed with only a few support trees for the tabs on the sides.
Statistics
Likes
0
Downloads
0