Sagrotan® / Dettol No-Touch Soap Dispenser Refill Cap - TPU
Description
This makes the "Refills" of the No-Touch Soap Dispenser really refillable. I used a 15 mm Forstner Bit on a drill press with a vise to drill the hole into the empty Refill Container. There are 2 STLs: One for printing the cap with TPU, which I recommend, and one for none flexible Filament. The cap is not watertight, it just seals the soap against dust. To print 94A TPU with my bowden printer Geeetech A10 I used these settings in Cura: Speed: 20 mm/s Infill: 20 % Printing Temperature: 220 °C Build Plate Temperature: 40 °C Retraction Distance: 2 mm Retraction Speed 30 mm/s To also reduce the wastage of soap I used this adapter: https://www.thingiverse.com/thing:3240308 Works perfectly!
Statistics
Likes
1
Downloads
0