The Impact printhead
Description
# Why this print head? - Compact and efficient - Fits on Ender 2 Pro and Neo series (**not for elder Ender 3**) - Support E3D v6 and Volcano hotends - Slightly print volume losses: 165x160 for Ender 2 Pro - Easy to print - no supports needed - Lightweight (aprox 250g without X carriage, printed from ABS) - Support ADXL345 accelerometer for calibrate Input Shaper - Optimized airflow for model cooling ### BOM - BMG gears kit - E3D V6/Volcano hotend - 40x40x10(20) axis fan for hotend - Nema 14 36mm pankake stepper motor - 1x 5015 turbo fans for model cooling - 8x M3x4x5 hot melt insert nut - 3x M3x8 round head screw - 6x M3x10 round head screw - 1x M3x12 round head screw - 2x M3x20 round head screw - 2x M3x25 round head screw - ~40mm PTFE tube ### Print settings - For base and mount use any filament with ~80°C heat resistance (PETG, ABS, ASA, HIPS, PA, PP, PC, etc.) - For fan ducts use any filament with ~100°C heat resistance (ABS, ASA, PA, PP, PC, etc.) - Models are created for 0.4mm line width and any layer height. If you plan to use other values, check layer preview to find wrong pathes. - Use 3+ perimeters and 30%+ infill for max rigidity of mount - The feeder based on K3D Minifeeder v2.2 by Dmitriy Sorkin (https://k3d.tech/minifeeder/) and reinforced by me Special thanks to DeltaDesignRus (https://www.thingiverse.com/deltadesignrus) for these awesome renders :D
Statistics
Likes
1
Downloads
0