P90 Handguard
Description
Bing Feng P90 Handguard Only mods required are to drill out the lower mounting point, it's in the location of the receiver screw. I dremmeled out the inside so it was flush and epoxied the internal mount to one side of the receiver. You will need some hardware: 2 x M4 standoffs, 20mm long https://www.aliexpress.com/item/1005002913946631.html?spm=a2g0o.order_list.0.0.783f1802ISaihU 2 x M4 set screws 12mm long 4 x M5 Counter sunk set screws 12mm long
Statistics
Likes
0
Downloads
0