Mesh male chastity tube with retainer ring
Description
Summary NOTE: Wear this device at your own risk. This is a male chastity tube that is held on with a retainer ring just behind the head. It is printed in 3 parts, a retainer ring, the tube and the head. The tube can either be a long, medium or short length, about 80mm, 60mm and 40mm respectively. The head cover is about 20mm long giving total lengths of 100mm, 80, and 60mm. The tube is about 35mm inside diameter. There are 5 sizes of retainer ring available from 22mm ID to 26mm ID. standard flat ring or a curved ergonomic ring. The head cover is held in place a "stealth lock", "magic locker" or "integral lock" common on many chastity cages. The shaft is pulled through the tube, perhaps with a stocking, the ring is then fitted behind the head and the pivot of the ring fitted into the recess in the tube. The head cover is then fitted over the lip at the top and into place. The lock is then installed. You may need a thin piece of stiff card to push any loose bits of skin out of the way when the head cover is closed.
Statistics
Likes
0
Downloads
0