Nazgul5 V2 Frame Footpads TPU and PLA
Description
Print orientation ~45deg as shown in image. There are multiple version with 2 variables wall (H)height and (R)diameter show as red lines in image. Default is H=5.2mm. Diameter 3.2mm for PLA and 2.8mm for TPU print Most vanilla TPU print would be "NazgulV2Pad_TPU_WallHeight5.2.stl". H6.2 I think is a bit improved version If you print PLA use *_PLA_*.stl because it has bigger screw hole
Statistics
Likes
0
Downloads
0