20mm RAM mount arm with rotating sockets
Description
***WORK IN PROGRESS*** RAM mount with rotating socket designed for 20mm balls. Joint to socket is a tight fit, depending on preference you may need to downsize the join for smoother rotations. Sockets are designed for M6 HEX bolts and washers. I used an M6-1.0 x 35mm HEX bolt with an M6-1.0 wing nut. I included a 130mm arm, with the sockets, center to center is 190mm. If you want to make your own length, connect the joint to a 20mm diameter cylinder or anything you want in between.
Statistics
Likes
0
Downloads
0