Lyre Harp Wall Hanger
Description
Picked up an inexpensive Lyre harp and needed a way to display/mount it on a wall so I created this. :) My harp is a 16 string with some funny radii so I traced the inside, measured it along a series of points, then created spline to match the shape. I downsized the shape a bit so there would be plenty of clearance. I added a couple of little posts so I could keep the tuning tool with the harp (it needs lots of tuning!) I put a couple of little holes in the back so it can be mounted securely to a wall. I just used some sheet metal screws without any wall anchors. Not printed in the prettiest color, but its what I had loaded up. :P There are a slew of cheap 16 string Lyres on Amazo*, so I'm guessing if you have one that appears to be a similar shape it will probably fit on this mount.
Statistics
Likes
0
Downloads
0