Sparco Shifter for Logitech
Description
from the tests I did it shouldn't need a screw due to a reduced clearance on the mounting surface. I will probably be finishing up the screw on version sometime soon. (will be made for the stock screw :) the Logitech shifters have a 8.55 MM bolt, the original bolt on wobbled even though it was 8.55, the 7.9mm was tights enough I felt it didn't need a bolt. Just noticed I streaked it at some point (probably to size it for the screw on model. . my print settings: 0.8 Nozzle you should be able to still use it with a smaller nozzle and higher print quality (as I used .32) Support yes (I wanted to leave it oriented how it is for tests and my first layers aren't as nice) I set my infill to 20% and that gave me just enough extra (with Tri-Hexigon infill) to add pinewood derby weights if I want to.
Statistics
Likes
0
Downloads
0