JKTech Enclosure Electronics V2 - 2023 Update
Description
Hey! This JKTech 3D Printer Enclosure Controller V2 is part of JKTech Smart Enclosure 2023 project: ---- Link coming soon ---- This is controller for ANY 3D Printer Enclosure that will control your PWM FAN (for HEPA+Carbon Filter) and monitor its RPM. Device also measures Temperature and Humidity of 2 different compartments and displays it in °C or °F. It will also control Digital RGB lighting system with different static and dynamic presets. Device features: - PWM FAN Control (Power + RPM) with ability to power off FAN completely (MosFET) - Digital RGB LED Control (3 and 4 Wire Digital LED strips supported. Like WS2812B etc.) - 2x Temperature+Humidity monitoring for two different compartments (Printer, Filament or Room) - Fire Detection algorithms - Dynamic RGB LED illumination options - Door sensing function (full white light when door is open for easy operation of 3D printer) - Very high precision FAN RPM reading - Brightness of Display and LED strips is now selectable. - °C and °F options You can purchase Electronics V2 here: https://www.jktech.si/en/store/3D-Printer-Enclosure-ELECTRONICS-V2-DIY-Enclosure-files-plans-p142928919 FOR ADVANCED USERS: This hadrware version is FINAL now and it's has a ton of new features and also upcoming upgrades: - Crystal clear TOUCH 3.5” HMI 480x320 display with it’s own GPU and great refresh rate! - Professional MAINBOARD PCB with DC-DC Regulator and screw terminals, so you can hook everything up without soldering! - Arduino Code - well commented and editable for your personal customization. - 3-wire AND 4-wire addressable RGB LEDs are supported! Virtually any addressable LED strip will run! - New Illumination modes! Currently there are a lot of RGB color modes for enclosure. - New FAN controller with FAN icon actually rotating on display! - Multiple temperature sensors supported! - Easy user definable variables to make custom device setting to your needs (Arduino code) - AUX Power OUT (5V,12V) (for relay, raspberry etc.) - AUX signal Ouputs / Inputs for additional custom sensors and stuff. - I2C port for additional sensors etc. - EEPROM function to save all the your selections in memory during power-down. - Everything is nicely hidden inside electronics enclosure and super clean! You will receive: - Fully presoldered mainboard for Electronics V2 - Onboard DC-DC regulator preset to correct voltage - All Electronics V2 files inc. Manual, Instructions, Bill of Material with links, Software, Arduno Code, photos, 3D model of enclosure in editable STEP and STL formats. - Files delivered to your e-mail. - Mainboard shipped with Priority+Tracked post or even Express DHL shipping. For more information about getting "Mainboard" shipped over or other questions, please contact me over e-mail: sales @ jktech.si Thanks everybody for supporting my projects!
Statistics
Likes
0
Downloads
0