Anycubic Vyper ADXL345 Hotend Mount Klipper
Description
This is a ADXL345 hotend mount for the Anycubic Vyper to make use of Klipper's Input Shaping automatic calibration. The Vyper seems to have a unique positioning for the hotend, and I couldn't find anything to fit it, so I'm uploading what I created in F365. I would recommend using something stronger than PLA. In this case, I used ASA, which printed quite nicely. The holes are 5mm in diameter to melt/press fit a M3 threaded insert (see link below). I used a soldering iron to melt them in place to ensure the board sits snug on the mount. You might also need to file this down slightly if it does not fit quite right. This will greatly depend on the nozzle size you use. I used a 0.4mm nozzle. Parts I used: - ADXL345 : https://a.co/d/3ynMb12 - Metric Threaded Insert Assortment: https://a.co/d/a9iFytK - Metric Machine Screw Assortment: https://a.co/d/hIcxJVK Good luck! I hope this helps anyone who wants to use Klipper on their Vyper!
Statistics
Likes
0
Downloads
0