Snack Dispenser
Description
Download Link: https://www.printables.com/model/294654-snack-dispenser If you download it, please download it from the link above. I don't want any money for my designs, but printables supports creators by giving them free Filament for downloads, so I can test my designs more and give more to the community ------------------------------------------------------------------------------------------- You don't want dirty fingertips, but are hungry for a Sack. Search no more - the Snack Dispenser dispenses your snacks right into your Mouth with the press of a Button. No more dirty fingers while gaming or just sitting on your Couch. Snacks with a diameter of 17 mm should have no problem with the dispenser. Note: The main_body has an inbuilt ramp, therefore only smaller snacks work with it If you want to snack larger and smaller snacks, just print the no_angle_body. If you then want to have the full experience for smaller snacks, print the Ramp for the “no_angle_body” and simply press it into the body. Extra components you'll need: 1 x Spring 49 mm x 12 mm x 1,15 mm A little bit of electrical Tape or any other Tape Printing: Print with your normal Print Settings. I would recommend 100% infill. The Main Body needs Support. Assembly: Put one layer of electrical Tape around the Main Body (for a smoother action). Put the spring into the Hole of the Main Body. Guide the Main Body into the Shell. Press the Main Body into the extended position so that the back window is clear. But the backstop in place and weld it with a soldering iron to the Shell. Put Snacks into the Main Body and close it with the lid. It's done - Happy eating! This is a work in progress. This is an old design of mine. Therefore, it was printed on an old 3D printer. The dimensions might not be 100% accurate of today's standard.
Statistics
Likes
0
Downloads
0