Kelvin Clamp
Description
In the need of Kelvin-Clamps for my HP 4264A LCR/ESR meter, I made these. Also suitable fo 4-wire Ohms measurement. # Materials needed for unshielded pair: * 4x printed thing (half-clamp) * 2x spring 6mm inner diameter * 4x metal strip ~2.3mm x 10mm of 0.4mm thickness e.g. from sample bag clip. I took mine from a automotive plug contact. * 2x M3 screw 10mm (no Idea what fits in the US) * 2x M3 lock nut * 4x flexible wire AWG23 or AWG24 or 0,22mm2 * some heatshrink tubing 10mm diameter * 4x banana plug 4mm or whatever your instrument wants to connect * some drops of glue # Materials needed for shielded pair: * 4x printed thing (half-clamp) * 2x spring 6mm inner diameter * 4x metal strip ~2.3mm x 10mm of 0.4mm thickness e.g. from sample bag clip. I took mine from a automotive plug contact. * 2x M3 screw 10mm (no Idea what fits in the US) * 2x M3 lock nut * 2x shielded flexible cable, 2 conductors + shield, AWG23 or AWG24 or 0,22mm2 e.g. I used "SommerCable Peacock MK2" * some heatshrink tubing 10mm diameter * 1x zip-tie 3mm * 5x banana plug 4mm or whatever your instrument wants to connect * some drops of glue # Assembly 1. Print stuff :D 2. Cut and then bend metal strips in L-shape as shown in the attached pictures. Check for fit in half-clamp - it shall barely not fit in 3. Tin one end of the metal strips on one side. 4. Strip and tin wire ends. 5. Feed wire ends through half-clamp tip, then solder quickly to metal strip. 6. Push the metal strip back in the half-clamp tip with a needle-nose plier. (works better when still hot from soldering, but be careful) 7. Add heatshrink and drops of glue to secure wires in place. Be careful with heating the heatshrink tube. 8. Add screw and lock nut. Tighten until just stays moveable. 9. Add spring (has to be threaded in when following the Pro-Tip). # Pro-Tip The half-clamps have a hole through where the spring resides. This enables to have the wire coming in at just one half-clamp, as shown in the pictures. Due to extra patience and dexterity needed, this is not for everyone ;)
Statistics
Likes
0
Downloads
0