LED Cam clamp mount for Artillery Sidewinder X2 / X1
Description
Mount your webcam or another cam to your Artillery without modifying your printer. You can just clamp it under the front left printer corner. In addition to [my previous version](https://www.thingiverse.com/thing:5425171), here are new features: - Fix the camera - there is a hole for a common 1/4 inch screw to mount the cam/webcam itself. If you like to print one, see [here](https://www.printables.com/de/model/224286-camera-webcam-screw-14-20-unc). - Adjust the horizontal mount angle of the cam by from -10° to +30° - Add a 12mm LED Stripe. You can combine it with the [Aircookie WLED project](https://kno.wled.ge/). Even more, if you are using [Klipper](https://www.klipper3d.org/) as your printer firmware - you can programm this LED stripe by custom g-code. See my [blog post](https://blog.freakydu.de/posts/2022-10-01-klipper_with_artillery_sidewinderx2/) as a straight forward tutorial, how to install klipper and make the first steps. A post, how to programming the led stripe may follow. - No need to modify your printer for installation Just print it - but make sure, your printer is calibrated well. You can also use a common M6 Screw instead of printing this one. Mine here has a length of around 15mm. I would be very happy to see your makes of that! And feel free to comment. Like it? [Buy me a coffee](https://www.buymeacoffee.com/freakydude) or "Tip Designer"
Statistics
Likes
0
Downloads
0