Soko Sagyo Ki easy print

Soko Sagyo Ki easy print

Description

Come support these models over on [Patreon](https://www.patreon.com/WGraves) **Buy my time, Not my models.** Easy to print Japanese SS KI engineering vehicle 1/100 scale. Some details have been changed for looks/ printability. If you do not want the bridgelaying rollers print the "engineer" variant. the one pictured is the "all parts" version. Be aware the non-resin versions have extra wheels for the bridgelaying components, either if you lose some or want them for stowage. The claws can be glued in the up or down position and be at the correct angle, but in the down position they will need to be trimmed for the vehicle to sit flat. The barrels are very thin and if you intend to use this on the tabletop I would snap them all off and replace them with metal (a cut down nail, etc) Image is of model printed in 1/52 with March to hell 28mm Russian for scale. The "resin" files are for those of you that are printing with resin printers and would prefer the assembled models. Scale by 1.56 for gaslands / hotwheels / 1/64 Scale by 1.786 for 28mm / 1/56 || 1/52 (x1.92) IMO looks best for heroic 28mm.

Statistics

Likes

0

Downloads

0

Category

Games

Tags