Microphone Holder Standard Mic & Samson Q2U 5/8"-27
Description
Microphone Holder with 5/8"-27 threads. Two sizes, one for standard size microphones and another larger version that fits the Samson Q2U and probably others as well. Print with supports. Orient the Stand Mount.stl with the threaded side against the build plate. Orient the Holders with the larger end of the microphone cone against the build plate. I used 30% infill and a brim to make sure it stuck to the build plate. Remove the supports and it should thread right on to a 5/8"-27 microphone stand. Holes in the Stand Mount are sized to fit either a 1/4"-20 x 3/4" (or 7/8") Button Head screw and a jam nut, or an M6 x 18mm (or 20mm) Button Head screw.
Statistics
Likes
0
Downloads
0