EasyGrip Modern Design Chess Set
Description
Modern Chess Set The EasyGrip chess set is a minimalistic design for an average size board and designed for ease of piece handling. This chess pieces have been designed to be easier to print on a 3D Printer with no supports required Each piece size and weight is detailed in pictures above . The back and front rank pieces have a cutout for an M8 mutter (nut) to be inserted for weighting. The dimensions of the M8 are appx. 14.5 x13x 6.4 mm. The depth of each cutout is appx. 6.48 mm to accommodate the 6.4 mm depth of the mutter. The chart pictured lists the appx. weights of each piece with the nut inserted and glued with a 3mm thick Felt (filz) base for easy movement. 1,5 mm Felt can also be used. The pieces fit well with a Square Size of 45 to 55 m Chess Piece Box The box has a slide top and is sized to accommodate this set. Details • Square Size 40 to 50 • Total Weight of Chess Pieces 452 gm • Weight of Box 319,30 gm • Box Dimensions 200x140x90 • Total Weight of Chess Pieces and Box 771,30 gm • Chess Pieces 32 Printing Each piece can be printed standing straight up with no supports required. Make sure your machine is well calibrated (leveled) for printing the box and you may want to run the bed a little on the hot side to prevent warping on the bottom and/or lid. Not a problem with a well-tuned MK3S+. The box was printed using • Filament PLA Prusament (Galaxy Black) • Infill 30% • Layer Height .20 The chess pieces were printed using • Black PLA Prusament (Galaxy Black) • White PLA Prusament (Vanilla White) • Infill 15 % • Layer Height .15 Quality • .90 extrusion multiplier • 200 2nd layer+ filament temperatures Weighting the Pieces and attaching felt • Insert the nut into the base of the piece • Apply some glue (model glue works well) to the base and nut • Put the glued surface lightly on the felt piece, don't press too hard • Allow to dry • Trim excess felt
Statistics
Likes
0
Downloads
0