Radiator clamp
Description
An adapted version of the radiator hook. It fits my radiator with 22.3 diameter tubes and an outer distance of 66 mm. It clamps a bit tighter than the original. The hook has a "height" of 15 mm which can be easily modified in the slicer. The Autodesk Fusion 360 f3d file can be customized by the parameters: Thickness: thickness of the loops Diameter: diameter of the radiator tubes OuterDistance: distance of the outer surfaces of two neighbouring radiator tubes Further: d17 is the length of the hook d32: the rounding of the flat surface edges d20: extrusion width: height of the hook. (Do not use PLA for printing ... except you never switch on the heating)
Statistics
Likes
0
Downloads
0