XY-3606 Buck Converter Case
Description
I made a little case for my XY-3606 DC Converter, the bottom of the case is 2mm thick but in 3 places where solder joints are the largest, i have an extra 1mm of clearance to allow the board to sit flat in the box. You can secure with M3 screws. Screw holes on the lid are 3.125mm so an M3 can slide in easily. then the body has 2.6mm, so you can thread your own, or with this newer version i just made, the walls around the screw holes are large enough to drill them out to 3mm so you can screw directly through and attach it to something. V1 is shown in images above, v2 is a better/tigher fit for the buck converter
Statistics
Likes
0
Downloads
0