Universal Frame Brace
Description
This is a heavy-duty frame brace designed for an Ender 3 Pro that can fit on any other printers with similar styled frames. The upper brackets feature an L-shaped profile for a solid, isostatic connection to the frame while minimizing the Z height loss from interference with the rollers or extruder assembly (it can go up to 246mm !). They also have integrated bearing mounts for 688 series bearings. The brackets use the original threaded holes on top of the frame for mounting (you will have to remove and discard the factory screws). For users who have a dual Z kit, you will also need the power supply bracket, which you can find at this link : https://www.thingiverse.com/thing:5614892 BE CAREFUL WHEN TIGHTENING THE BRACES, LACK OF CAUTION MAY CAUSE DAMAGE ON PARTS OR PRINTER. PROGRESSIVE TIGHTENING IS HIGHLY ADVISED. Required hardware : - 2x 19" Threaded rod - 7/16-14 NC (you will need longer rods for bigger printers) - 8x Flat washer USS 7/16 - 8x Hex Nut 7/16-14 NC - 4x Socket head screw M5-0.8x25 - 12x Socket head screw M5-0.8x12 - 12x T-nuts - M5-0.8x4
Statistics
Likes
0
Downloads
0