Camera Arm with Leds holder and Improved movements
Description
Extra Axis movement and Leds holder. The last Arm is remade to connect to connect to the extra Joint. New extra 90 degrees rotated Joint to create extra axis movement. Print: Make the parts that hold the bolts strong!!! Do not just use infill, but create more external perimeter layers that will make it strong! Build: Replace the last ARM with included XL ARM version. Use included Joint to connect XL ARM to Led-Cam holder with same M5 Nut/bolt as original mounts. Leds: 2812B RGB 5V. Connected to Wemos D1 / Wled > 24-5V regulator > Ender Powersupply. Challenge was to connect the corners. I used 3 tiny wires and soldered. But there are 90 Led hook connectors available on Alie if you don't want to solder. My leds did not have the glue on the back (used leds), so i used hot glue (ugly i know ;)).. D1 board has limited power, so do not attach to many leds directly to the D1 board. Tip... In Octoprint, Install Wled addon. Want to know more or need help? Just ask...
Statistics
Likes
0
Downloads
0