Filament Sensor Adapter for Micro Swiss Bowden Extruder on CR-6 with PTFE outfeed
Description
This is a remix of the Micro Swiss model that will allow the filament exiting the runout sensor to feed directly into the extruder's PTFE tube for seamless filament loading. Print in the orientation the model loads in. Supports may be needed depending on your printer's abilities. Installation instructions: install the extruder per the Micro Swiss instructions. install the PTFE tube and C clip in the extruder. Slide the PTFE into the adapter plate hole, and screw the adapter to the printer chassis. using a razor blade, trim the PTFE tube flush with the inside of the adapter hole. Install the runout sensor and secure it with screws. reconnect the cable.
Statistics
Likes
0
Downloads
0