Lanyator : Spyderco Paramilitary 2 & 3 Lanyard pusher
Description
https://www.youtube.com/watch?v=shrLvTC-4CQ Hey there, i like to modify or clean my Spyderco knifes but it is always annoying to remove the scales from the lanyard plug. So I designed this Lanyator to solve that problem. It works like a simple chain tool and ensures an efficient flow of power without jamming or damaging the scales. An advantage of the tool made out of plastic is that it will not scratch the knife parts. The tool should be printed with 100% infill and 3-4 perimeters. I used PC for the pusher (white part) and ASA or XPETG for the other parts (Body and bottom). I would not recommend to use soft materials. To assemble the Lanyator you need 3 x M4 x 20 mm screws. If you have problems with the pusher fitting into the body you can use some lubricant to smoothen the action or you might need a M10. Have fun and keep printin (cutting) ! If you like my work, I would be very happy about a small tip :) https://www.paypal.com/paypalme/MeisterEdel
Statistics
Likes
0
Downloads
0