HC-SR501 Motion Detector Housing
Description
This Housing Is Designed As Small As Possible And Has A Screw Hole Mount. The Circuit Board Has Mount Holes Inside For 5Mm X 1.5Mm Screws. The Lid Has A Form Fitting Double 90 Ledge To Help With Final Sealing As Does The Lens With A Brim That Encases The Square Part Of The Lens. At The Bottom Of The Lid Is A 2Mm X 6Mm Rectangular Hole Which Is Lined Up With The Three Contacts. A Light Adhesion Silicone Caulking Is Recommended For Weather Sealing The Unit.
Statistics
Likes
11
Downloads
0