Pen mount for Rear Mirror in Toyota Aygo
Description
In the Toyota Aygo, I was looking for a way to always have a pen immediately accessible. Ideally, it would be at the top of the mirror, and lo and behold, there was a small groove where you can attach something. So I quickly developed something with the 3D printer. The whole thing consists of 2 parts that are printed out and pushed together. Now you can glue them together or heat them briefly on the other side with a small burner so that they join together to form an object. Do not print out as PLA, it is not temperature resistant, especially in the car temperatures of about 60 degrees Celsius in the summer come about quickly, then a PLA element just melts and drips down. PETG/ ABS/ASA or nylon is recommended. You can simply slide the whole object over the rear-view mirror and then simply click a standard biros into it. Most ballpoint pens with a diameter of about 10mm should fit. Alternatively, you can adapt the file. The whole thing was designed for the Toyota Aygo 1.0, I don't know if it fits other models. It does not fit the Opel Vivaro. - - - - - - - - - - - - - - - Im Toyota Aygo suchte ich eine Möglichkeit einen Stift immer sofort zugänglich zu haben. Ideal wäre es oben am Spiegel, und siehe da da war eine kleine nut wo man etwas befestigen kann. Also schnell etwas mit dem 3D Drucker entwickelt. Das ganze besteht aus 2 Teilen die einmal ausgedruckt zusammen geschoben werden, jetzt kann man das untereinander verleimen oder auf der anderen Seite mit einem kleinen Brenner kurz erhitzen damit sich das ganz zu einem Objekt verbindet. Bloß nicht als PLA ausdrucken, das ist nicht Temperatur beständig, gerade im Auto kommen schnell Temperaturen von ca 60 Grad Celsius im Sommer zustande, da schmilzt dann ein PLA Element mal eben und tropft runter. Empfohlen ist PETG/ ABS/ASA oder Nylon. Das ganze Objekt kann man einfach oben über dem Rückspiegel aufschieben und kann dann einfach einen Standard Kugelschreiber dort einklicken. Die meisten Kugelschreiber mit ca 10mm Durchmesser sollten passen. Alternativ kann man sich die Datei ja anpassen. Entworfen wurde das ganze für den Toyota Aygo 1.0, ob es bei anderen Modellen passt weiss ich nicht. Beim Opel Vivaro passt es nicht.
Statistics
Likes
0
Downloads
0