Button Sleeve Adapter (12mm - 16mm)
Description
Was working on a GE dryer and the plastic retaining clips for the START button were broken. Opted to replace with a generic momentary push switch button. Only one's I had on hand were for a 12mm hole and the dryer's was 16mm so I created this adapter sleeve. The lip face has tapered for clean flush mount (22mm). The button thread is fine m12 - 0.75 and made the outer thread m16 - 1.25. Included are several m16 nuts as well. One nut has notches so can be tightened with needle nose pliers if in a confined space. No raft is necessary and with 0.15 resolution threads came out smooth. To reduce stringing I'd recommend printing the sleeve and nut separately.
Statistics
Likes
0
Downloads
0