printbed lightning A10 Ender 3 40x40mm aluminum
Description
I have designed a lighting for the A10. This is certainly also usable for other printers with 40x40mm frame. It is best to use LED strips that do not get so hot. Maybe fix them with some glue. The cables can be hidden quite well. On the left side of the A10 there are 2 small holes where the cables can be hidden well. The LED strips are connected either: - at the lower case fan (24V): The LEDs switched on directly with the printer. - or to a free bottom fan. Then the LEDs can be switched and dimmed via Gcode or the panel. In both cases a DC-DC-StepDown module is used: 24V to 12V. Translated with www.DeepL.com/Translator (free version)
Statistics
Likes
0
Downloads
0