Jomurema GT01 body clips (modified)
Description
The Jomurema body clips always mount the car low, made some body clips that raise the body 1mm, bringing the body level with the bottom of the chassis (without having to shim, etc). I have also made versions that are .5mm and 1mm thicker to compensate for side-by-side wobble with the Kyosho MR03 chassis (1mm probably useless). They are LEFT and RIGHT specific. I print these on their side (as they would mount in the body) for strength, print solid, with supports. Note: Designed for FDM printer, not tested with a resin printer; tolerances may be off since I build in for the FDM squash. Was inspired by tailslide5_0's fantastic Jomurema clips for the Reflex RX-28 (https://www.thingiverse.com/thing:5458950).
Statistics
Likes
0
Downloads
0