Height Gauge & Marker for pencils
Description
Heyho I make knife and for the handles I don´t want to use my heavy height ripper all the time. So I designed this height marking device to use with a normal pencil. There are two versions. 1. 7,5 mm - 65 mm markable height. 2. 7,5 mm - 104,5 mm markable height. In addition to the printed parts and a standard sized pencil you will need one M5 screw. I used a M5 x 20 mm one. But shorter screws will work fine too! I printed it with PLA, 3 Perimeters & 25% infill. But more certainly does no harm and make the system stiffer. If you have problems with turning the knob use some paraffin (kandle) or another lubricant. Have fun marking and keep on printin! If you like my work, I would be very happy about a small tip :) https://www.paypal.com/paypalme/MeisterEdel
Statistics
Likes
0
Downloads
0