DJI FPV Goggle USB-C Power-Delivery
Description
So recently I bought a DJI-FPV-Drone and did not like how they designed the power supply of the fpv-goggle. They use this round dc power connector with a external battery pack... so far so good. First thing I tried then was connecting my Power-Delivery (PD) power bank, of course this does not work cause the dc connector has no way to tell if the goggle is PD ready. But I want to use any PD power bank to juice up the goggles. So I designed this. Inside it holds a PD Trigger Module at an angle to guide the USB-C connector around to the side of the goggle. I disassembled the goggle to solder two wires to the back of the goggles pcb, to connect to the PD Trigger Module. I used the original black metal cover to mount the 3d printed part on to, with 3x M3x6mm screws and nuts. Of course you need to drill holes in the metal cover for the screws and the two wires. PD Module: https://www.amazon.de/gp/product/B0B4NTGMPG/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&th=1
Statistics
Likes
0
Downloads
0