Walksnail_Avatar_VTX_mount_TBS_SourceOne
Description
The VTX is not centered with the 20x20 holes, it is offset by 1.5 mm on the back to center the VTX between the spacers. This support is in two parts for ESC power cable The VTX is fixed with 4 M2x15 screws + 4 M2 nuts The Mount is fixed with spacers and 2 M3x8 screws and 2 M3 nuts All my designs are here : https://www.thingiverse.com/grou69/designs
Statistics
Likes
0
Downloads
0