MakerFarm Prusa i3 Magma cooling system remix
Description
This Is A Remix Of The Original Cooling System By Thiagokunz, Which Is A Must-Have For Anyone With The Prusa I3 From Makerfarm With The Magma Hot End. The Differences Here From The Original: 1. Allowed Slightly More Fit Tolerance Between Pieces 2. Added Retainer Clip For Wedge (Back) Piece 3. Added Bolt Through-Holes For Easier Removal 4. Added The New Fan Cover As-Is With A 90 Degree Rotation For Printing The Main Feature Is The Bolt Through-Holes, Which Allow You To Remove The Entire Hot End With The Cooling System Attached (After Removing The Bolts Holding The Extruder In Place). This Will Definitely Slightly Reduce The Airflow But Should Keep To The Original Design'S Intention Of Directing Airflow Away From The Nozzle. The Cooling Fan For The All-Metal Magma Hot End Is A Must, But Having Air Blow On It Makes It Much Harder To Reach Temperature And Interferes With The Deposition Of Material. Use This If You Have A Need For Frequent Changing Of Your Extruder Head (E.G. If You Are Swapping It For A Cnc Router Or Laser Cutter Head). Changes: V14 (7 Oct 2013) - Closed Small Gap In Bolt Hole Shoulders On Main Duct Shroud 10 Oct 2013 - Added Fan Cover (Verbatim By Thiagokunz, Just Rotated)
Statistics
Likes
75
Downloads
0