Multi Cluster 2.5 inch hdds raspberry pi etc
Description
I resized the existing design to accept 2.5 inch hdds. You will probably need spacers for the screws. Made Caddys for: Raspberry Pis 2.5 inch hdds usind ugreen sata to usb 3 A Adapters(The smallest/cheapest I could find) 2x PiZero optimised for POE-hat use. (Very high, Will use multiple levels, normal usb Power might need 90 degree cables) Arduino Uno or Mega (accepts both) 3x NVME SSDs. Should fit any usb-c adapter card( just shuck any adapter, uses normal ssd holes, pick which ones you don't use, You might need a higher stand off for the center ssd to clear the other pcbs) 8x12cm Prototype PCBs (for those of you who want to make a custom solution) Blank Caddy (just add whatever holes or glue you need) might add a version for dampened hdds later. Added holes to the rack so you can screw multiples together in any direction. Rack size can be easily adjusted with fusion360.
Statistics
Likes
0
Downloads
0