osVAC compact 90degree bend with slip ring, no supports needed
Description
90 degree bend for osVAC. Print both parts as shown in the screenshot. The female connector with the slip ring should rotate freely right after printing without any problems. Assemble both pieces, should be a tight fit. I secured the parts with a drop of super glue. The female adapter uses my osVAC leak tight modification. You can add a 37x32x2.5mm O-ring to achieve an air tight fit, a really cheap one will do. Without O-ring, it will work as any other osVAC connector. Printed in PETG with 0.15mm layer height.
Statistics
Likes
0
Downloads
0