ADS-B receiver case for Raspberry Pi 4B + RTL-SDR + filter
Description
I wanted a compact, unobstrusive case for an ADS-B receiver. This fits: – a Raspberry Pi 4B – a Nooelec RTL-SDR v5 (or similar) – a generic 1090 or 978 MHz filter module Hardware needed: – 6 x M3 x 10mm screws (can be longer) for the lid – 4 x M2.5 or M3 * 5mm screws for mounting the Pi (I used nylon screws) It's a bit large but should fit most printers (maybe diagonally). Passive cooling works reasonably well with a heatsink. Make sure to orient it correctly, fins vertical (my photo shows it wrong ;).
Statistics
Likes
0
Downloads
0