Dewalt TStak Flat Top Toolbox Oganizers
Description
Organizer bins for the Dewalt TSTAK folding handle toolboxes. I wanted some more separation for more parts, but also wanted to be able to take the container out of the bin. Two styles included - short and regular. The Short bins are 4mm shorter than the box so they clear the ridges in the top lid. The regular versions are designed with cut-outs to allow the lid to close. There are front and back versions, as the front and back notches are in a different spot. Only one of each side is included - you can mirror the x or y-axis in your slicer software to get all 4 bins printed. This will make more sense if you look at the photos and the STL files. I've included several versions - a full bin, a split bin by vertical and horizontal and a 4-compartment. Hope this helps someone else! If you make one, please post a make. Just about any print settings will work - I use a .4mm nozzle and .3mm layer heights with 3 perimeters.
Statistics
Likes
0
Downloads
0