Stock Land Rover steel wheels for trx4m
Description
This is a set of 1" wheels that I designed for use on the Traxxas TRX4M Land Rover, they are designed to look like the stock steel wheels found on countless old Land Rovers. They are a beadlock design that uses two wheel halves screwed together (you will need a total of 16 #1x72 screws, 4 for each wheel) sandwiching a lock ring in between. the "hubcap" part may need to be glued into position (it has 4 holes in the back to interface with the protruding screws if necessary) but on my set I found that they press fit quite snugly. Due to their size and hex pattern these will also fit scx24's, fms crawlers, etc.
Statistics
Likes
0
Downloads
0