Rengoku Sheath
Description
Sheath for Rengoku's katana from demon slayer. Modeled around the original "thing". Depending on paint and tolerances, you will need to adjust the size of the x and y, but keep the height the same. It has too much extra clearance if unchanged, so it will be loose. For example, I did some painting on the katana blade, so I changed the x and y to 90% and kept z at 100%. RengokuSheath0 is a tolerance test of the end, where that needs to be able to clear the entire blade. The middle of this particular blade is wider than the rest, so I would recommend trying this to start with. RengokuSheath is the full thing if you have a large printer or want to slice it into pieces yourself. 10-20% infill will work fine, too much more and it can get heavy. No supports needed, except maybe on the two end pieces. Rafts optional.
Statistics
Likes
0
Downloads
0