Vacuum Bed Riser Battle Kit
Description
Model has been moved to Printables.com: - https://www.printables.com/model/321129 I want the vacuum robot to be able to go below the kid's bed. **So here is my solution:** - Rising the bed by 27mm with the 3D feets + couple of millimeters from the felt patch - feet are designed for a 60mm x 40mm rectangular wooden feet (see pictures) - Felt diameter needs to be D35mm or below - Cutting about 25mm of wood on one of the side of the bed with a jigsaw and then hiding my crime with a custom piece. That give an additional ~5 cm to the robot to go below the bed, given that the original feet where about 5cm too. **Most robot are about 10cm high**. I have a roborock (see picture) **Print:** - Advice: Make the feet strong ! **Assemble:** - Screw the feet in place with a wood screw (length 30mm or more - Diam 5mm or below) - Stick the felt below the feet (D35mm felt of below) - Seems a bit specific but I hope it helps someone !
Statistics
Likes
0
Downloads
0