Pro trinket box
Description
A Printable Box To Fit An Adafruit Pro Trinket Processor. The Processor & Charging Setup Are Mounted To The Bottom Of The Box By A Couple 2Mm Socket Cap Screws. Bosses For These Are Printed In The Bottom Of The Box. There Is Also Room To Fit A 150Mah Lipo Battery And More Left Over For Some Sensors & Wiring. The Processor : Https://Www.Adafruit.Com/Product/2000 The Charger : Https://Www.Adafruit.Com/Product/2124 The Lipo Battery : Https://Www.Adafruit.Com/Product/1317 The Switch : Https://Www.Adafruit.Com/Products/805 The Little 8X8 Led Matrix : Https://Www.Adafruit.Com/Product/959 The Tiny Little Mounting Screws : Https://Www.Boltdepot.Com/Product-Details.Aspx?Product=6358 This Example Is Being Used To Run A Rechargeable Led Matrix Pattern Generator For Kids. Video Link : Https://Vimeo.Com/128328337 I'Ve Included The Solid Works Source File So People Can Modify The Box To Suit Their Needs.
Statistics
Likes
30
Downloads
0